New Milling Machine McLaren Series 1MW
Starting from $15,180.00
SERIES 1 MW SPECIFICATIONS
Table
Size Overall ............... 9” x 49”
T-Slots
Number .................. 3
Size .................. 5/8”
Distance Between .................. 2-1/2”
Dial Graduations ................... 0.001”
Range
Longitudinal ................... 34”
Cross ................... 12.5”
Vertical Knee ................... 17”
Center of Table to Column Face - Max ...... 17.5”
Center of Table to Column Face - Min ................. 5”
Vertical Spindle
Quill Travel ................ 5”
Head Tilt - Forward & Backward ................ 45 deg.
Head Rotation - Side to Side .................... 90 deg.
Turret Rotation on Column .................... 360 deg.
Spindle Nose to Top of Table - Max ............... 18”
Spindle Nose to Top of Table - Min .............. 1”
Center of Spindle to Column Face - Max ...... 21”
Center of Spindle to Column Face - Min ... 5-1/2”
Spindle Taper (uses drawbar) .............. R-8
Spindle Rotation ............... Forward
and Reverse
Spindle Motor ................ 3HP
Spindle Speeds - Infinitely Variable:
Back Gears ............... 70 to 525 RPM
Direct Drive ............... 500 to 4200 RPM
Quill Feeds (3) - Per Spindle Revolution .... .0015”, 0.003”
Model 747-2, 747-2B
Starting from $28,985.00
Features:
Variable speed head with exclusive direct lever control for quick. easy speed adjustment.
Precision vernier scale for quick depth setting.
Rigid overarm on wide dovetails.
The spindle is supported by four (4) angular contact bearings for added rigidity and precision.
Stronger head clamping than usually found.
3 3/8" quill with the choice of #30 MMT or R-8 spindle taper.
Heavier than usual 9" x 49" table with coolant channels and 34" of travel. Available in manual or with optional power speed.
One-shot lube system.
Heavy-duty saddle.
Full hand wheels have large dials which are graduated in increments of .001
A power quill feed that is available at all spindle speeds and rated for a 5/8" diameter drill. 60% greater than most knee-type mills.
Large, heavily ribbed knee with wide ways.
Way covers.
Massive column and base for maximum machine rigidity.
Optional Extras:
30 MMT and other spindle taper options are available.
Longitudinal, cross, or knee power feeds.
Flood coolant systems.
Right-angle milling head.
Power drawbar.
Digital read-out systems.
Riser blocks.
Column-mounted light.
With Ballscrews on X & Y Axis